S-0.87 iniha Micro 128×32 Dots OLED Hōʻike Module Pale
Ka wehewehe nui
| ʻAno Hōʻike | OLED |
| inoa inoa | HOOLAHA |
| Nui | 0.77 iniha |
| Pikika | 64×128 kiko |
| ʻAno hōʻike | Hoʻopaʻa paʻa |
| Wahi ʻeleu (AA) | 9.26×17.26 mm |
| Nui o ka Panel | 12.13×23.6×1.22 mm |
| kalakala | Monochrome (Keʻokeʻo) |
| Olinolino | 180 (Min)cd/m² |
| ʻAno hoʻokele | Hāʻawi i loko |
| Ikepili | 4-uwea SPI |
| Dute | 1/128 |
| Helu Pin | 13 |
| IC Keaukaha | SSD1312 |
| Voltage | 1.65-3.5 V |
| Kaumaha | TBD |
| Hana Hana | -40 ~ +70 °C |
| Ka Mahana Waihona | -40 ~ +85°C |
ʻIke Huahana
X087-2832TSWIG02-H14 0.87" PMOLED Hōʻike Module
Nānā nui:
ʻO ka X087-2832TSWIG02-H14 he 0.87-inch passive matrix OLED (PMOLED) hōʻike module e hōʻike ana i kahi hoʻonā dot matrix 128 × 32. Me kona ʻano kikoʻī, ka hoʻolālā hoʻoheheʻe ʻana iā ia iho, a me ka hoʻohana haʻahaʻa haʻahaʻa, kūpono ia no nā noi i hoʻopaʻa ʻia a me nā pākaukau.
Nā mea nui:
- Hōʻike Hoʻonā Kiʻekiʻe: 128 × 32 dot matrix no nā kiʻi ʻoniʻoni a akaka
- Hoʻolālā Ultra-Compact: Nā ʻāpana module o 28.54 × 8.58 × 1.2 mm; wahi hana o 22.38 × 5.58 mm
- Hoʻohui ʻia SSD1312 Controller: Kākoʻo i ka interface I²C no ka hoʻohui maʻalahi
- COG (Chip-on-Glass) Hoʻolālā: ʻAʻole koi ʻia ke kukui hope—hoʻokuʻu ponoʻī no ka hoʻemi ʻana i ka mānoanoa a me ke kaumaha.
- Haʻahaʻa mana hoʻohana: Optimized no 3V mana lako
- Kākoʻo Voltage ʻElua:
- Hāʻawi noʻonoʻo (VDD): 2.8V
- Hōʻike lako (VCC): 9V
- Hana maikaʻi:
- 50% ka hoʻohālike papa helu i kēia manawa: 9V (keʻokeʻo)
- 1/32 hana kaʻa no ka mālama mana
Paʻa Kaiapuni:
- Ka Mahana Hana: -40°C a +70°C
- Ka Mahana Waihona: -40°C a i +85°C
Nā noi:
- Nā mea hiki ke hoʻohana ʻia (nā wati akamai, nā mea hoʻoikaika kino)
- E-cigarette a me nā lako mālama pilikino
- Nā mea uila uila (nā peni hoʻopaʻa leo, nā hāmeʻa paʻa lima)
- Nā mea lapaʻau a me ke olakino (nā mākaʻikaʻi glucose, pulse oximeters)
No ke aha e koho ai i ka X087-2832TSWIG02-H14?
- Slim & Lightweight: Kūpono no nā hoʻolālā paʻa
- ʻIke ʻike maikaʻi: ʻokoʻa kiʻekiʻe a me nā kihi ʻike ākea
- Hiki i ka ikehu: He kūpono no nā mea hana pākaukau
- Hana Paʻa: Paʻa i nā mahana wela
Hoʻomaikaʻi i kāu Hoʻonā Hōʻike i kēia lā!
E ʻike i ka ʻenehana OLED ʻokiʻoki me ka X087-2832TSWIG02-H14—e hoʻomaikaʻi i ka hoʻopiʻi ʻike maka o kāu huahana me ka hoʻonā ʻoi, ka ʻōlinolino maikaʻi, a me ka hoʻohui pū ʻana.
Aia ma lalo iho nā pono o kēia hōʻike OLED mana haʻahaʻa
1. Ka lahilahi—ʻAʻohe pono o ke kukui kua, hoʻokuʻu iho;
2. Wide nanaki kihi: Free degere;
3. Kiekie Olinolino: 120 (Min)cd/m²;
4. Kiʻekiʻe hoʻohālikelike lākiō (Dark Room): 10000: 1;
5. ʻO ka wikiwiki pane kiʻekiʻe (<2μS);
6. Laulā hana wela;
7. E emi iho ka mana.
Kiʻi Mechanical
Hoʻolauna Huahana
0.87-inihi 128 × 32 dot matrix OLED module e wehewehe hou i nā ʻoluʻolu hiʻohiʻona paʻa, e hāʻawi ana i ka hana ʻokoʻa i kahi ʻano ultra-slim form factor kūpono no nā noi kaohi ʻia.
Hana Kiʻi Kūlike ʻole
• He 128×32 hoʻonā aniani akaka me ka ʻōlinolino 300cd/m²
• Nā pae ʻeleʻele maoli me ka ratio like ʻole (1,000,000:1)
• 0.1ms ka manawa pane ultra-wikiwiki e hoʻopau i ka motion blur
• 178° ākea nānā kihi me ka pololei waihoʻoluʻu pololei
Hana ʻia no ka Versatility
• Nā ʻāpana ultra-compact (22.0×9.5×2.5mm) me ka bezel 0.5mm
• Hoʻonui i ke ola pākaukau (0.05W typical).
• -40°C a i +85°C ka pae wela hana
• MIL-STD-810G e pili ana i ka ha'alulu/vibration
Nā hiʻohiʻona hoʻohui akamai
• Pākuʻi ʻano ʻelua: SPI (10MHz) / I2C (400kHz)
• Ma luna o ka SSD1306 mea hoʻoponopono me 128KB pahu pahu
• Pākuʻi a pāʻani me Arduino/Raspberry Pi
• Kākoʻo hoʻomohala piha me:
- Nā palapala API kikoʻī
- Laʻana code no nā paepae nui
- Hōʻike hoʻolālā schematics
Hoʻonā Noi
✓ ʻenehana hiki ke hoʻohana ʻia: Nā wati akamai, nā mea hoʻoikaika kino
✓ Nā mea lapaʻau: Nā mākaʻikaʻi paʻa, nā mea hana diagnostic
✓ HMI ʻOihana: Nā panela hoʻomalu, nā mea ana
✓ Mea hoʻohana IoT: Nā mea hoʻoponopono home akamai, pāʻani mini
Loaʻa i kēia manawa me ke kākoʻo ʻenehana piha
E kelepona i kā mākou hui kūʻai no:
• Nā koho hoʻonohonoho maʻamau
• Kumukuai Volume
• Nā pahu loiloi
