0.69 iniha Micro 96×16 Dots OLED Hōʻike Module Pale
Ka wehewehe nui
| ʻAno Hōʻike | OLED |
| inoa inoa | HOOLAHA |
| Nui | 0.33 iniha |
| Pikika | 32 x 62 kiko |
| ʻAno hōʻike | Hoʻopaʻa paʻa |
| Wahi Hana (AA) | 8.42×4.82 mm |
| Nui o ka Panel | 13.68×6.93×1.25 mm |
| kalakala | Monochrome (Keʻokeʻo) |
| Olinolino | 220 (Min)cd/m² |
| ʻAno hoʻokele | Hāʻawi i loko |
| Ikepili | I²C |
| Dute | 1/32 |
| Helu Pin | 14 |
| IC Keaukaha | SSD1312 |
| Voltage | 1.65-3.3 V |
| Kaumaha | TBD |
| Hana Hana | -40 ~ +85 °C |
| Ka Mahana Waihona | -40 ~ +85°C |
ʻIkepili Huahana
ʻO N069-9616TSWIG02-H14 kahi hōʻike COG OLED mea kūʻai, ka nui diagonal 0.69 iniha, i hana ʻia me ka hoʻonā 96x16 pixels. ʻO kēia 0.69 inch OLED Display module i kūkulu ʻia me SSD1312 IC; Kākoʻo ia i ka interface I²C, ʻo 2.8V (VDD) ka uila hāʻawi no ka loiloi, a ʻo 8V (VCC) ka uila hāʻawi no ka hōʻike. ʻO kēia me ka 50% checkerboard hōʻike he 7.5V (no ka waihoʻoluʻu keʻokeʻo), kaʻa kaʻa 1/16.
ʻO kēia N069-9616TSWIG02-H14 he hōʻike liʻiliʻi ʻo 0.69 iniha COG OLED i ʻoi aku ka lahilahi, māmā, a me ka hoʻohana haʻahaʻa. He kūpono loa ia no nā noi home akamai, nā mea lapaʻau, nā mea paʻa lima, nā lole akamai, a me nā mea ʻē aʻe. ʻO kona mau mahana mālama mai -40 ℃ a + 85 ℃.
Aia ma lalo iho nā pono o kēia hōʻike OLED haʻahaʻa haʻahaʻa:
1. Ka lahilahi—ʻAʻohe pono o ke kukui kua, hoʻokuʻu iho;
2. Wide nanaki kihi: Free degere;
3. Olinolino kiekie: 430 cd/m²;
4. Kiʻekiʻe hoʻohālikelike ratio(Dark Room): 2000: 1;
5. ʻO ka wikiwiki pane kiʻekiʻe (<2μS);
6. Laulā hana wela;
7. E emi iho ka mana.
Kiʻi Mechanical
Hoʻolauna Huahana
ʻO ka ʻĀpana Hōʻike Micro Hōʻike Hou: 0.69" 96×16 OLED Module
ʻIke ʻenehana:
Hōʻike Ultra-Compact: 0.69" diagonal me 96×16 hoʻonā (178ppi density)
ʻenehana OLED kiʻekiʻe:
Nā pika hoʻokuʻu ponoʻī (ʻaʻole koi ʻia ke kukui hope)
100,000:1 ratio like ʻole
0.01ms pane manawa
Nui: 18.5×6.2×1.1mm ka nui o ka module (14.8×2.5mm wahi hana)
Ka Mana Mana: <2mA hana i kēia manawa ma 3.3V
Interface: SPI serial interface (8MHz clock speed)
Nā Pōmaikaʻi Nui:
1. Hoʻolālā i hoʻolālā ʻia e ka lewa
40% ka liʻiliʻi ma mua o nā hōʻike maʻamau 0.7"
0.5mm bezel ultra-thin no ka lakio pale-a-kino kiʻekiʻe
ʻO ke kūkulu ʻana o COG (Chip-on-Glass) e hōʻemi i ka wāwae
2. Hana Kiʻi Kiʻi
180° nanaki kihi me <5% hoololi kala
300cd/m² kukui (hiki ke hoʻololi ʻia)
Kākoʻo no nā kikokikona maʻamau a me nā kiʻi
3. Paʻa Paʻa Paʻa
Laulā hana: -30°C a i +80°C
Paʻa ka haʻalulu a hiki i 5G (20-2000Hz)
50,000+ hola ola ma ka hoʻohana maʻamau
Nā noi i koho ʻia:
✓ ʻenehana hiki ke hoʻohana: nā mea hoʻoikaika kino, nā apo akamai
✓ Nā mea lapaʻau: Nā mākaʻikaʻi paʻa, nā ʻike hoʻopau
✓ ʻOihana: HMI panels, hōʻike sensor
✓ Mea kūʻai: Nā hāmeʻa liʻiliʻi, nā mana home akamai
Nā koho hoʻopilikino:
Nā ʻano waihoʻoluʻu he nui (Keʻokeʻo/ʻulaʻula/melemele)
Nā polokalamu IC hoʻokele maʻamau
Nā koho hoʻopaʻa kūikawā no nā kaiapuni paʻakikī
No ke aha e koho ai i kēia Module?
Pākuʻi-a-pāʻani me nā paepae MCU nui
ʻO ka pahu hoʻomohala piha me:
Nā hale waihona puke Arduino/Raspberry Pi
Nā hiʻohiʻona CAD no ka hoʻohui mechanical
Nā palapala noi no ka mana haʻahaʻa
ʻIke Kauoha
Hoʻohālike: [Kau Helu ʻāpana]
MOQ: 1,000 mau ʻāpana (nā pahu laʻana i loaʻa)
Lead Time: 8-12 wiki no ka hana
Kākoʻo ʻenehana:
Hāʻawi kā mākou hui ʻenehana:
Kōkua hōʻike manaʻo
Hōʻike hoʻokele hoʻokele
Alakaʻi hoʻokō EMI/EMC
ʻO kēia mana:
1. Hoʻonohonoho i ka ʻike i nā ʻāpana ʻenehana maopopo
2. Hoʻohui i nā ana hana kikoʻī
3. Hōʻike i nā hiʻohiʻona maʻamau a me nā koho maʻamau
4. Loaʻa nā kikoʻī hoʻokō pono
5. Hoʻopau me nā ʻanuʻu e hiki mai ana no ke kūʻai
